By signing up to our emedia list you will be the first to learn about new innovations and products we bring to market, plus any special offers or advice we think you should know about.
We will normally send you just one emedia message a month to your registered email address.
We promise never to sell, rent or lease your details to anyone else.
Emedia message content is limited to articles associated with Ti Tiles International, Ti Dynamic Facades and our industry.
We use code within our HTML based emedia to identify open rates and click through rates. This is quite normal and helps us identify what information is of most value to our readers.
Every emedia message we send you will include a single click option to unsubscribe. If you choose to unsubscribe, we will stop sending you emedia messages.
2000mm x 600mm
Approx 35kg/m² on tiles up to 1200mm; approx 38kg/m² for tiles over 1200mm
Single Skin 22mm or 26mm; Twin Skin 34mm
Heights of 150mm, 175mm, 200mm, 225mm, 250mm, 300mm, 400mm, 500mm and 600mm; lengths as required
Natural, Antigrafitti, Glazed
Recessed EPDM gasket, powdercoated aluminium joint either 8mm or 2mm; flushed or recessed
150mm, 175mm, 200mm, 225mm, 250mm, 300mm, 400mm, 500mm and 600mm
30 years
BBA Accredited
Approx 2600 x 1200mm
Approx 42kg/m²
15mm
Wide range of variable coursing heights from 150mm up to 1200mm
Polished, honed, flamed, water jet, sandblasted
8-10 mm horizontal joint
Variable vertical joint down to min 6mm
10 years
Tested at Vinci technology Centre to CWCT Guidelines for Building Envelopes 2005
Wind resistance & impact resistance
Available up to 1800 x 900mm, subject to stone choice and availability
47kg/m²
18mm granite backing.
Wide range of variable coursing heights from 150mm up to 900mm
Honed and polished
8-10 mm horizontal joint
Variable vertical joint down to min 6mm
10 years
Tested at Vinci technology Centre to CWCT Guidelines for Building Envelopes 2005
Wind resistance & impact resistance
Available up to 1500 x 750mm, subject to stone choice and availability
25kg/m²
27mm honeycomb backing
Wide range of variable coursing heights from 150mm up to 750mm
Honed and polished
8-10 mm horizontal joint
Variable vertical joint down to min 6mm
10 years
Tested at Vinci technology Centre to CWCT Guidelines for Building Envelopes 2005
Wind resistance & impact resistance
3000 x 1200mm
Approx 21kg/m²
9mm
1200 x 600mm, 1200 x 1200mm, 2400 x 600mm, 2400 x 1200mm, 3000 x 600mm, 3000 x 1200mm
Matt and Gloss
8mm
10 years
Tested at Vinci technology Centre to CWCT Guidelines for Building Envelopes 2005
Wind resistance & impact resistance
3000 x 1200mm
Approx 35kg/m²
15mm
1200 x 600mm but cut to size if required
Smooth, rock, stone, ripple, ridge
8mm
10 years
Tested at Vinci technology Centre to CWCT Guidelines for Building Envelopes 2005
Wind resistance & impact resistance
1200 x 600mm
Approx 35kg/m²
14mm
600 x 600mm, 1000 x 600mm, 1200 x 600mm
Polished and honed
8mm
10 years
Tested at Vinci technology Centre to CWCT Guidelines for Building Envelopes 2005
Wind resistance & impact resistance
1600 x 600mm
35kg/m²
15mm
1200 x 600mm, 1600 x 600mm
Silk, lightly sanded, bush-hammered, sandblasted, striped, patinated
8mm
10 years
Tested at Vinci technology Centre to CWCT Guidelines for Building Envelopes 2005
Wind resistance & impact resistance
1800 x 900mm
Approx 50kg/m²
Either 15mm or 18mm
Generally 1200 x 600mm but cut to size as required
Polished and honed
Depending on the carrier rail system either 8mm or 6mm
10 years
Tested at Vinci technology Centre to CWCT Guidelines for Building Envelopes 2005
The information on this page is intended to act as a guideline to our products/systems performance and properties. Whilst every care has been taken to ensure accuracy, please note it is the responsibility of the specifier/installer to ensure the products/systems will meet the desired design criteria. Specific information on design details, material properties and colour samples etc. can be requested from Dynamic Support on 08700 500981.