UrbanGlass is thinner and lighter than traditional materials, so it is easier to work with on site. It is available in larger panel sizes and can be shaped and curved to clad pillars and rounded corners. UrbanGlass can be used in isolation, or it can be mixed with other materials on the same elevation either inside or out. It is perfect for creating impact with performance on large elevations such as those found on civic buildings, shopping centres, airports and hotels. Various panel sizes are available see below for details. URBAN GLASS - PANEL SIZES - CLADDING (mm) SIZE THICKNESS 1 THICKNESS 2 THICKNESS 3 600 x 400 n/a 18mm 12mm 600 x 600 25/30mm 18mm 12mm 600 x 900 25/30mm 18mm 12mm 900 x 900 25/30mm 18mm n/a 600 x 1200 25/30mm 18mm n/a 900 x 1200 25/30mm 18mm n/a 900 x 1800 25/30mm 18mm n/a Download Ti Tracking PDF(1mb)

TECHNICAL SPECIFICATION COMPARISON PROPERTIES URBANGLASS GRANITE Diffuse reflection rate % 85 66 Regular reflection rate % 4 4 Thermal expansion coefficient X10-6/K 6.1 7 Thermal conductivity W/(m.K) 1.4 2.1 Specific heat J/(kg.K) 710 750 Specific gravity 2.7 2.7 Bending strength N/mm2 41 14 Mohs' hardness 6.5 5.5 Compression strength Mpa 400 295 Acid resistance mg/cm2 0.08 1.0 Alkali resistance mg/cm2 0.05 0.10 Seawater resistance mg/cm2 0.1 0.2 Water absorption rate % 0 0.4 Freeze resistance % 0.028 0.25

URBANGLASS is available in high gloss or honed finish, Various panel sizes are available click here for details. It is proving its superiority over more traditional, non renewable materials. For example the table below shows the differences between URBANGLASS and granite.